9-Frame Radial Hand Extractor w/Honey Tank
As the honey runs down it is strained through a stainless steel filter and stored in the attached honey tank. When you finish you detach the extractor from the tank, raise it off the floor onto something that gives you clearance to bottle. Cover with the steel tank cover. Leave it for several days to settle and the air bubbles to rise to the top and then bottle your crop. (220 lbs./18 gal. tank).
Note: This extractor must be shipped in two boxes. One at the 96 lb. rate and one at the 65 lb. rate.
Ratings & Reviews
Spins honey from up to 9 frames at once, both sides!
by Rob Holmes
This is the second extractor I've owned. It is great and does all that is listed on the Brushy Mtn site. It allows me to spin honey out both sides of the frames at once. That alone saves a lot of time. It is easier to clean and sterilize than my old 6-frame extractor. The tank stores about 220 lbs., which is good if you have several hives. A whole super's frames can be placed into the spinner at once. This is good strong stainless steel. The manufacturing of the plastic crank parts is also well-done. I would buy this again in a heartbeat.